--- title: STC Q30 - 06 (Main Device) slug: stc-q30-06-main-device createdAt: 2024-03-09T03:58:06.518Z --- :::hint{type="info"} **STC Q30 - 06 Home Router: - **STC introduces a fast Wi-Fi 5 Mesh system that provides speeds up to 5400 Mbps. ::: **Your package includes the following Router and its accessories** :::hint{type="success"} 1. **Router** 2. **Power Adapter** 3. **LAN Cabel for Internet ** 4. **Welcome Card** ::: ![](https://api.archbee.com/api/optimize/KZS2kSNB9nbOHl0Cfr4pZ/ueylVHt9RmY70ju8FKnc8_image.png) :::hint{type="info"} For your reference, here are some images of the **STC Q30 - 06 Home Router**. ::: ::Image[]{src="https://api.archbee.com/api/optimize/KZS2kSNB9nbOHl0Cfr4pZ/tUVUYDHgQLYX9qgSJuuFe_001.jpg" size="84" width="2604" height="3138" position="center" showCaption="false"} # # Method - 1 :::hint{type="info"} ## How to Setup STC Q30 - 06 Home Router? (With Internet cable) ::: :::hint{type="info"} ### Step 01 Plug in the Power Adaptor 1. Connect one end of the power adaptor to the wall socket and the other end to the back of the router (DC -12v). 2. The LED lights will turn blue once the **First router** has been plugged in. (within a few minutes). ::: :::hint{type="warning"} ***Note:*** Only the internet LED on the router will be **RED**, and it will turn **BLUE** after the internet connection is established. ::: ::Image[]{src="https://api.archbee.com/api/optimize/KZS2kSNB9nbOHl0Cfr4pZ/4XgmCkcVwGTDIoiM0VcH5_002number.jpg" size="84" width="3840" height="5108" position="center" showCaption="false"} :::hint{type="info"} ### Step 02 Internet connection  Pre-Condition for Internet connection - Internet Cable - Called it Ethernet Cable. - Source of internet connection - Called ISP Network or Main Internet. - Ensure the Internet plan is active in your ISP Network. 1. Connect your Ethernet cable to the Yellow/LAN port of your main Internet source (ISP). 2. Then plug the other end of the cable into the **Blue/WAN port** of your first router. 3. Your Router will be Successfully Connected - make sure all LED turns  **BLUE.** **Note: You can now access the Internet through this Router using either WiFi or an Internet cable.** 1.  For WiFi Connection, you will find the ** WiFi Name and Password at the bottom of the Router.** 2. LAN Connection: - To connect the internet cable, insert one end of the cable into the **YELLOW **port of the First Router and insert the other end into your Laptop/PC, etc. ::: ::Image[]{src="https://api.archbee.com/api/optimize/KZS2kSNB9nbOHl0Cfr4pZ/mx9N5kB1VHvoex95Z9Cwz_003number.jpg" size="80" width="4023" height="4918" position="center" showCaption="false"} :::hint{type="warning"} 1. ***Note: - ***After the First Router successfully **connects to the internet**, the device system **(firmware) starts receiving an update.** 2. **Do not use the First Router** for any other purpose during the update process. 3. In the event of a **Power failure** or loss of **Internet connection**, the firmware update process might be interrupted. (Rest assured, **it will resume automatically once power is restored or the internet connection is re-established**) You will observe that all the LEDs on the device begin blinking with a combination of **Purple** and **Blue** lights. Eventually, the **Purple** light becomes steady, followed by each LED transitioning to a stable **Blue** light, one by one. This sequence indicates that your **First Router has been successfully updated with the latest firmware.** ::: :::hint{type="info"} ### Step 03 Access Internet Service on the First Router You can now access the Internet through this First Router using either Wi-Fi or an Internet cable. 1. For Wi-Fi Connection, you will find the WiFi Name and Password at the bottom of the Router. 2. To connect the internet cable, insert one end of the cable into the **YELLOW** port of the first router, and insert the other end into your laptop/PC, etc. ::: :::hint{type="success"} Here, you can see the physical interface and indications of your STC Q30 - 06 Home First Router for your better und How to Setup STC Q30 - 06 Home Router? (With Micro SIM Card) Step 01 Plug in the Power Adaptor Connect one end of the power adaptor to the wall socket and the other end to the back of the router (DC -12v). The LED lights will turn "Blue" once the First router has been plugged in. (within a few minutes) Size 84x Image Caption Image alt text Inserting Micro SIM Card for Internet Connection To establish an Internet connection with a Micro SIM card, follow these steps: 1\. Locate the SIM slot on the backside of the Hub. 2\. Insert a Micro SIM card into the SIM slot. 3\. Power on your Hub. 3\. Wait for the Hub to establish a connection to the 4G network. Size 100x Image Caption Image alt text :::