---
title: Xunison Hub Q50 Home
slug: xunison-hub-q50-home
description: Introducing the Xunison Hub Q50 Home router with Wi-Fi 6 Mesh technology, delivering lightning-fast speeds of up to 5400 Mbps. This all-inclusive package comes with everything you need for a seamless setup, including the router, power adapter, cables, rem
icon: š
createdAt: 2023-06-17T05:56:07.000Z
---
**Congratulations!! Welcome to Xunison**
:::hint{type="info"}
**Xunison Hub Q50 Home router: - **Xunison introduces a fast Wi-Fi 6 Mesh system that provides speeds up to 5400 Mbps, offering a great user experience with the use of Matter technology.
:::
Your package includes the following Router and its accessories
:::hint{type="success"}
1. **Router**
2. **Power Adapter**
3. **Internet Cable for Net **
4. **HDMI Cable for TV **
5. **Android TV Remote **
6. **Welcome Card**
:::
:::hint{type="info"}
For your reference, here are some images of the **Xunison Hub Q50 Home router**.
:::
:::hint{type="success"}
## How to Setup Xunison Q50 Home Router?
:::
:::hint{type="info"}
### Step 01 Plug in the Power Adaptor - Power Adaptor
1. Connect one end of the power adaptor to the wall socket and the other end to the back of the router (DC -12v).
2. The LED lights will turn blue once the **First router** has been plugged in. (within a few minutes).
:::
:::hint{type="warning"}
***Note:*** Only the internet LED on the router will be **RED**, and it will turn **BLUE** after the internet connection is established.
:::
:::hint{type="info"}
### Step 02 Internet connection
Ā Pre-Condition for Internet connection
- Internet Cable - Called it Ethernet Cable.
- Source of internet connection - Called ISP Network or Main Internet.
- Ensure the Internet plan is active in your ISP Network.
1. Connect your Ethernet cable to the Yellow/LAN port of your main Internet source (ISP).
2. Then plug the other end of the cable into the **Blue/WAN port** of your first router.
3. Your Router will be Successfully Connected - make sure all LED turnsĀ
**BLUE.**
**Note: You can now access the Internet through this Router using either WiFi or an Internet cable.**
1. Ā For WiFi Connection, you will find the
** WiFi Name and Password at the bottom of the Router.**
2. LAN Connection: - To connect the internet cable, insert one end of the cable into theĀ **YELLOW **port of the First Router and insert the other end into your Laptop/PC, etc.
:::
:::hint{type="warning"}
1. ***Note: - ***After the First Router successfully **connects to the internet**, the device system **(firmware) starts receiving an update.**
2. **Do not use the First Router** for any other purpose during the update process.
3. In the event of a **Power failure** or loss of **Internet connection**, the firmware update process might be interrupted. (Rest assured, **it will resume automatically once power is restored or the internet connection is re-established**)
You will observe that all the LEDs on the device begin blinking with a combination of **Purple** and **Blue** lights.
Eventually, the **Purple** light becomes steady, followed by each LED transitioning to a stable **Blue** light, one by one.
This sequence indicates that your **First Router has been successfully updated with the latest firmware.**
:::
:::hint{type="info"}
### Step 03 Access Internet Service on the First Router
You can now access the Internet through this First Router using either Wi-Fi or an Internet cable.
1. For Wi-Fi Connection, you will find the WiFi Name and Password at the bottom of the Router.
2. To connect the internet cable, insert one end of the cable into the **YELLOW** port of the first router, and insert the other end into your laptop/PC, etc.
:::
:::hint{type="success"}
Here, you can see the physical interface and indications of your Xunison Q50 Home First Router for your better understanding.
:::
